Hey,
I'm new to this forum and program alike, and I didn't manage to find anything regarding this subject..
I've made a 32-bit full-adder and would like to combine the outputs into 1 32-bit link, instead of the current 32 1-bit links.
I have used the Splitter to split 32-bit inputs from the circuit into 32 1-bit inputs to the adders, but have found no similar component for combining the 32 1-bit outputs from the 32 adders into 1 32-bit input for the circuit.. Am I missing anything? Can the splitter be used as a "combiner" aswell?
Any help will be appreciated, thanks in advance
Combining Outputs?
-
- Posts: 57
- Joined: Thu Apr 24, 2014 12:30 pm
Re: Combining Outputs?
Hello DolevBaron,
As you've said yourself, you've missed something.
You can use the splitters in two ways, for splitting wires and for combining wires.
Good luck, with your projects and enjoy, using logic circuits.
I hope you will enjoy it, as much as I did and still do.
Feel free to ask anything about designing and about using this software.
It is wise to look at other projects on this forum.
Best regards,
Hans Cadans
As you've said yourself, you've missed something.
You can use the splitters in two ways, for splitting wires and for combining wires.
Good luck, with your projects and enjoy, using logic circuits.
I hope you will enjoy it, as much as I did and still do.
Feel free to ask anything about designing and about using this software.
It is wise to look at other projects on this forum.
Best regards,
Hans Cadans
Re: Combining Outputs?
as hans said ^^
you're welcome to the community, I'll also be there to answer question and talk a lot about my creations ( 'w')
you're welcome to the community, I'll also be there to answer question and talk a lot about my creations ( 'w')