Circuit eats almost whole CPU

If you have something to say about LogicCircuit program or you know how to improve it please share it here.
Post Reply
User avatar
superryan94
Posts: 53
Joined: Sat May 09, 2015 5:59 am
Location: Rotterdam The Netherlands

Circuit eats almost whole CPU

Post by superryan94 »

I made a circuit to move around some dots and I connected A 64 bit randomiser to it. This itself doesn't look that heavy on my CPU. However, when I start the circuit I can't get a higher frequency than 1.0 and my displays doesn't even show anything at all. Could it be that I made some kind of killer machine for my computer without knowing it?
Attachments
Circuit Project.CircuitProject
(1.67 MiB) Downloaded 472 times
User avatar
superryan94
Posts: 53
Joined: Sat May 09, 2015 5:59 am
Location: Rotterdam The Netherlands

Re: Circuit eats almost whole CPU

Post by superryan94 »

I forgot to remove the led display in circuit2. Under that there is a multiplexer.
User avatar
admin
Site Admin
Posts: 406
Joined: Sun Jun 14, 2009 10:53 pm
Contact:

Re: Circuit eats almost whole CPU

Post by admin »

Can you upload new version?
User avatar
superryan94
Posts: 53
Joined: Sat May 09, 2015 5:59 am
Location: Rotterdam The Netherlands

Re: Circuit eats almost whole CPU

Post by superryan94 »

Not any more. I fixed it with a sensor. Now my circuit stays usable even if the randomiser is on:)
Post Reply