Seems to be a bug when using TriState

If you have something to say about LogicCircuit program or you know how to improve it please share it here.
Post Reply
TomasL
Posts: 21
Joined: Sat Jul 11, 2015 2:46 am
Location: Borås, Sweden
Contact:

Seems to be a bug when using TriState

Post by TomasL »

There seems to be some bug when using tri-state.
Output from an OR element gives "-" when all inputs are un-connected, I was told that they should default to "0" when unconnected.
User avatar
admin
Site Admin
Posts: 406
Joined: Sun Jun 14, 2009 10:53 pm
Contact:

Re: Seems to be a bug when using TriState

Post by admin »

Sorry, somehow I missed this question.
You probably don't have the output of OR gate connected to anything user can see. That is optimized away and not evaluated. If this is not the case, please upload your circuit here I will have a look.
TomasL
Posts: 21
Joined: Sat Jul 11, 2015 2:46 am
Location: Borås, Sweden
Contact:

Re: Seems to be a bug when using TriState

Post by TomasL »

Well, here is what I do.
Attachments
test.CircuitProject
(6.04 KiB) Downloaded 452 times
TomasL
Posts: 21
Joined: Sat Jul 11, 2015 2:46 am
Location: Borås, Sweden
Contact:

Re: Seems to be a bug when using TriState

Post by TomasL »

And a sligtly modified one, when it is first powered on, all remains tri-stated, when it is toggled the first time, it works ok, sub sequently.
Attachments
test.CircuitProject
(8.04 KiB) Downloaded 443 times
User avatar
admin
Site Admin
Posts: 406
Joined: Sun Jun 14, 2009 10:53 pm
Contact:

Re: Seems to be a bug when using TriState

Post by admin »

This issue is fixed now. You can download and try new version
TomasL
Posts: 21
Joined: Sat Jul 11, 2015 2:46 am
Location: Borås, Sweden
Contact:

Re: Seems to be a bug when using TriState

Post by TomasL »

Ok, thanks.
Post Reply