www.logiccircuit.org

Hi Boz,
New release of the program is available. It addresses some of the issues you’ve pointed out. Please feel free to download http://www.logiccircuit.org/download.html and try.
Eugene

Hi David, In short you can create as many logic circuits as you want and use them on other circuits. There is a menu Circuit in the program for this purpose. You can read help topic about this on this web site: http://www.logiccircuit.org/advanced.html Other topics are described here: http://www.log...

Hi Boz, Thank you for suggestions. You do not need to turn off the simulation to change constant, just double click it and it will be incremented by modulo (2 power of it bit width). So for one bit constant just flipping from 0 to 1 and back to 0 again. There is a way to share you circuit between di...

Hi there, Thanks for providing your feedback. Many issues are fixed now and you can download new version and check if it works better for you. So wires are sticky to pins now and you need to press Shift to move circuits without them. Drawing wires are much easier now. New property “Category” added t...

Hi, Thank you for using LogicCircuit and sharing your ideas. * The objects/wires snap in on the raster only from the lower-right. It would be much more faster if they would align to the grid from "all sides" around the point which I was targeting. This is already fixed in the latest versio...

If you have some state holding circuits in your circuit project like flip-flops you’ve probably noticed that when you turn power on they all flipped to some random state. Of course such flip-flops usually have a reset input and you want to send a reset signal to that input after the power gets on. B...

This forum is for discussing logical circuits. Feel free to ask questions answer other people questions and post and download circuits, share and seek ideas and so on. In order to upload Circuit Project file please zip it and then upload here this will save traffic for people on low bandwidth. As an...